Low Voltage Back
 

 

 

 

 
 
Home  >> Products >> Low Voltage >> Themostat & Heater >> ZR 011
   
DUAL THERMOSTAT
 
  ZR 011
Features
 
NO and NC in one casing
Separate adjustable temperatures
High switching capacity
Terminals easily accessible
DIN rail mounted
 
Two thermostats in one casing:
Thermostat(contact breaker, normally closed) for regulating heaters.
Thermostat(contact maker, normally open) for regulating filter fans and heat exchangers or switching signal devices when temperature limit has been exceeded. Heaters and cooling equipment can be switched independently from each other with a temperature offset as opposed to the usual change-over contacts.
 
   
 
  Technical Data
 
Switch temperature difference:    7K(±4K tolerance)
Sensor element:   Thermostatic bimetal
Contact type:   Snap-action contact
Contact resistance:   <10mΩ
Service life:   >100,000 cycles
 
    250VAC,10(2)A
Max. Switching capacity:   120VAC,15(2)A
    DC30W
 
EMC:   Acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3
 
Connection: 4-pole terminal. damping torque 0.5Nm max.:rigid wire 2.5mm²stranded wire (with wire end ferrule)
 
  Mounting:   Clip for 35mm DIN rail,EN60715 or for exit filter EF 118 Series
   
Casing:   UL94 V-0 , plastic according to UL94 V-0, light grey
 
Dimensions:   67 x 50 x 46mm
 
Weight:   Approx.90g
 
Installation position:   Variable
 
Operating/Storage temperature:   -20 to+80℃(-4 to +176℃) / -45 to+80℃(-49 to +176℃)
 
Protection type:   IP20
 
Example of connection
 
Art. No.  Setting range Setting range
01172.0-00 contact breaker, normally closed 0 to + 60℃ contact maker, normally open 0 to + 60℃
01172.0-01 contact breaker, normally closed +32 to + 140°F contact maker, normally open +32 to + 140°F
01175.0-00 contact breaker, normally closed -10 to + 50℃ contact maker, normally open +20 to + 80℃
01175.0-01 contact breaker, normally closed +14 to + 122°F contact maker, normally open +68 to + 176°F
01176.0-00* contact maker, normally open  0to + 60℃ contact maker, normally open  0 to + 60℃
01176.0-01* contact maker, normally open +32 to + 140°F contact maker, normally open +32 to + 140°F
 
 

 

 

 

  Back

Copyright ©. Sunfad Electrical Group Co., Ltd. All Rights Reserved